Show Navigation

Search Results

Refine Search
Match all words
Match any word
Prints
Personal Use
Royalty-Free
Rights-Managed
(leave unchecked to
search all images)
{ 125 images found }

Loading ()...

  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1607_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1599_MA.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1745.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1601_MA.jpg
  • Burnside Bridge (1926) comprises a double-leaf bascule drawbridge main span, flanked by longer riveted double-intersection Warren deck truss approach spans. The bridge has long multi-beam steel deck girder approach spans bridging railroad tracks, freeways and city streets of downtown Portland, while the main span bridges a fetch of the Willamette River navigable to full-size commercial shipping. This bridge replaced the original 1894 wrought iron truss steam-powered swing-span bridge, two spans of which were repurposed as the current Bull Run River Bridge and Sandy River Bridge on Lusted Road, both in neighboring Clackamas County. Striking features of this bridge are its riveted double-intersection (lattice) Warren trusses featuring intermediate sub-verticals – an uncommon truss configuration, and its ornate bridge operator’s houses. The bridge was designed by Gustav Lindenthal and Joseph Strauss. Other notable features are its hidden below-deck counterweights, ornamental concrete balustrade railings, and fine metal railings on the lift spans. This bridge has great historical significance. Multnomah County, Oregon, USA.
    AJH_200830_7070.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1790.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2198.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2208.jpg
  • Springfield Railroad Bridge (1911), also called Union Pacific Springfield Railroad Bridge for the line that it carries, is a traditional railroad through truss bridge over the Willamette River, between Springfield and Eugene. The design is comprised of a Pratt truss secondary span (left) and a Parker truss main span (right), with trestle approach spans (not visible). A Parker truss is a variation of the older flat-topped Pratt truss; note how the taller Parker truss is essentially a Pratt truss (left) with a polygonal top chord. Originally built in 1911, it is reported that the main span (Parker truss) was strengthened extensively in 1925. Notable features are the riveted construction and pin-connected framing. Lane County, Oregon, USA.
    AJH_221115_1666.jpg
  • Springfield Railroad Bridge (1911), also called Union Pacific Springfield Railroad Bridge for the line that it carries, is a traditional railroad through truss bridge over the Willamette River, between Springfield and Eugene. The design is comprised of a Pratt truss secondary span (left) and a Parker truss main span (right), with trestle approach spans (not visible). A Parker truss is a variation of the older flat-topped Pratt truss; note how the taller Parker truss is essentially a Pratt truss (left) with a polygonal top chord. Originally built in 1911, it is reported that the main span (Parker truss) was strengthened extensively in 1925. Notable features are the riveted construction and pin-connected framing. Lane County, Oregon, USA.
    AJH_221115_1660.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1613_MA.jpg
  • Springfield Railroad Bridge (1911), also called Union Pacific Springfield Railroad Bridge for the line that it carries, is a traditional railroad through truss bridge over the Willamette River, between Springfield and Eugene. The design is comprised of a Pratt truss secondary span (left) and a Parker truss main span (right), with trestle approach spans (not visible). A Parker truss is a variation of the older flat-topped Pratt truss; note how the taller Parker truss is essentially a Pratt truss (left) with a polygonal top chord. Originally built in 1911, it is reported that the main span (Parker truss) was strengthened extensively in 1925. Notable features are the riveted construction and pin-connected framing. Lane County, Oregon, USA.
    AJH_221115_1664.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1620_MA.jpg
  • Springfield Railroad Bridge (1911), also called Union Pacific Springfield Railroad Bridge for the line that it carries, is a traditional railroad through truss bridge over the Willamette River, between Springfield and Eugene. The design is comprised of a Pratt truss secondary span (left) and a Parker truss main span (right), with trestle approach spans (not visible). A Parker truss is a variation of the older flat-topped Pratt truss; note how the taller Parker truss is essentially a Pratt truss (left) with a polygonal top chord. Originally built in 1911, it is reported that the main span (Parker truss) was strengthened extensively in 1925. Notable features are the riveted construction and pin-connected framing. Lane County, Oregon, USA.
    AJH_221115_1659.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1604_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1598_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1574_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1625_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1596_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1594_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1593_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1584_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1628_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1627_MA.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1576_MA.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1739.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1731.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1718.jpg
  • Burnside Bridge (1926) comprises a double-leaf bascule drawbridge main span, flanked by longer riveted double-intersection Warren deck truss approach spans. The bridge has long multi-beam steel deck girder approach spans bridging railroad tracks, freeways and city streets of downtown Portland, while the main span bridges a fetch of the Willamette River navigable to full-size commercial shipping. This bridge replaced the original 1894 wrought iron truss steam-powered swing-span bridge, two spans of which were repurposed as the current Bull Run River Bridge and Sandy River Bridge on Lusted Road, both in neighboring Clackamas County. Striking features of this bridge are its riveted double-intersection (lattice) Warren trusses featuring intermediate sub-verticals – an uncommon truss configuration, and its ornate bridge operator’s houses. The bridge was designed by Gustav Lindenthal and Joseph Strauss. Other notable features are its hidden below-deck counterweights, ornamental concrete balustrade railings, and fine metal railings on the lift spans. This bridge has great historical significance. Multnomah County, Oregon, USA.
    AJH_200830_7065.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1621_MA.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1735.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1725.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1757.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1729.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1723.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1715.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1709.jpg
  • Burnside Bridge (1926) comprises a double-leaf bascule drawbridge main span, flanked by longer riveted double-intersection Warren deck truss approach spans. The bridge has long multi-beam steel deck girder approach spans bridging railroad tracks, freeways and city streets of downtown Portland, while the main span bridges a fetch of the Willamette River navigable to full-size commercial shipping. This bridge replaced the original 1894 wrought iron truss steam-powered swing-span bridge, two spans of which were repurposed as the current Bull Run River Bridge and Sandy River Bridge on Lusted Road, both in neighboring Clackamas County. Striking features of this bridge are its riveted double-intersection (lattice) Warren trusses featuring intermediate sub-verticals – an uncommon truss configuration, and its ornate bridge operator’s houses. The bridge was designed by Gustav Lindenthal and Joseph Strauss. Other notable features are its hidden below-deck counterweights, ornamental concrete balustrade railings, and fine metal railings on the lift spans. This bridge has great historical significance. Multnomah County, Oregon, USA.
    AJH_200830_7067.jpg
  • Richardson Bridge (1912) is a rare example of a double-intersection Warren through truss design. A Warren truss (or equilateral truss) utilizes equilateral triangles in its truss geometry for ultimate weight-saving efficiency. This bridge has been moved twice, but remaining within Oregon. Originally built in 1912 over the Crooked River in Crook County, it was relocated in 1956 to a crossing of the Siuslaw River in Lane County, and finally, in 1986, relocated to its current location in West Eugene and converted to a pedestrian-bicycle crossing of Amazon Creek for the Fern Ridge Trail. Partial dismantling for the 1956 and 1986 relocations saw the original rivet fasteners being replaced with modern-era high strength bolts. Notable is the absence of upper lateral bracing. Lane County, Oregon, USA.
    AJH_221115_1591_MA.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1762.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1760.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1753.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1755.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1746.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1728.jpg
  • Burnside Bridge (1926) comprises a double-leaf bascule drawbridge main span, flanked by longer riveted double-intersection Warren deck truss approach spans. The bridge has long multi-beam steel deck girder approach spans bridging railroad tracks, freeways and city streets of downtown Portland, while the main span bridges a fetch of the Willamette River navigable to full-size commercial shipping. This bridge replaced the original 1894 wrought iron truss steam-powered swing-span bridge, two spans of which were repurposed as the current Bull Run River Bridge and Sandy River Bridge on Lusted Road, both in neighboring Clackamas County. Striking features of this bridge are its riveted double-intersection (lattice) Warren trusses featuring intermediate sub-verticals – an uncommon truss configuration, and its ornate bridge operator’s houses. The bridge was designed by Gustav Lindenthal and Joseph Strauss. Other notable features are its hidden below-deck counterweights, ornamental concrete balustrade railings, and fine metal railings on the lift spans. This bridge has great historical significance. Multnomah County, Oregon, USA.
    AJH_200830_7068.jpg
  • Ferry Street Bridge (1950), also called Coburg Road Bridge for the road that it carries, is a two-span continuous Warren through truss steel bridge, with polygonal top chord, spanning the Willamette River. It is located near downtown Eugene, where the city’s founder Eugene Skinner once operated a ferry service. The bridge has long multi-beam concrete approach spans, accounting for the flood plain and floodway corresponding to the river hydrology. The bridge was constructed in 1950 – replacing its predecessor from 1876 – and was extensively rehabilitated in 1999 by Mowat Construction Company. Notable features are its mid-span pier (mid river), supporting a continuous truss, ornamental lighting, and separated pedestrian/bicycle walkways on both sides, supported by curved cantilever sidewalk brackets. Lane County, Oregon, USA.
    AJH_221116_1697.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1748.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1740.jpg
  • Ferry Street Bridge (1950), also called Coburg Road Bridge for the road that it carries, is a two-span continuous Warren through truss steel bridge, with polygonal top chord, spanning the Willamette River. It is located near downtown Eugene, where the city’s founder Eugene Skinner once operated a ferry service. The bridge has long multi-beam concrete approach spans, accounting for the flood plain and floodway corresponding to the river hydrology. The bridge was constructed in 1950 – replacing its predecessor from 1876 – and was extensively rehabilitated in 1999 by Mowat Construction Company. Notable features are its mid-span pier (mid river), supporting a continuous truss, ornamental lighting, and separated pedestrian/bicycle walkways on both sides, supported by curved cantilever sidewalk brackets. Lane County, Oregon, USA.
    AJH_221116_1690.jpg
  • Ferry Street Bridge (1950), also called Coburg Road Bridge for the road that it carries, is a two-span continuous Warren through truss steel bridge, with polygonal top chord, spanning the Willamette River. It is located near downtown Eugene, where the city’s founder Eugene Skinner once operated a ferry service. The bridge has long multi-beam concrete approach spans, accounting for the flood plain and floodway corresponding to the river hydrology. The bridge was constructed in 1950 – replacing its predecessor from 1876 – and was extensively rehabilitated in 1999 by Mowat Construction Company. Notable features are its mid-span pier (mid river), supporting a continuous truss, ornamental lighting, and separated pedestrian/bicycle walkways on both sides, supported by curved cantilever sidewalk brackets. Lane County, Oregon, USA.
    AJH_221116_1693.jpg
  • Springfield Main Street Bridge (1929), also called Willamette River Springfield Bridge, is a 3-span continuous Warren through truss bridge over the Willamette River, between Springfield and Eugene. Striking features of this bridge, constructed in 1929, are the graceful arch-shaped curvature of its polygonal top chord geometry, decorative concrete railings and entrance pylon ornamental lights. The bridge was designed by Conde B McCullough, acclaimed bridge engineer and designer of many arched bridges on the Oregon Coast Highway noted for their beauty and innovation. Other notable features: it is one of only three pre-1941 continuous truss designs, and it is the largest non-cantilever truss span in the state. Lane County, Oregon, USA.
    AJH_221115_1634.jpg
  • Ferry Street Bridge (1950), also called Coburg Road Bridge for the road that it carries, is a two-span continuous Warren through truss steel bridge, with polygonal top chord, spanning the Willamette River. It is located near downtown Eugene, where the city’s founder Eugene Skinner once operated a ferry service. The bridge has long multi-beam concrete approach spans, accounting for the flood plain and floodway corresponding to the river hydrology. The bridge was constructed in 1950 – replacing its predecessor from 1876 – and was extensively rehabilitated in 1999 by Mowat Construction Company. Notable features are its mid-span pier (mid river), supporting a continuous truss, ornamental lighting, and separated pedestrian/bicycle walkways on both sides, supported by curved cantilever sidewalk brackets. Lane County, Oregon, USA.
    AJH_221116_1841.jpg
  • Springfield Main Street Bridge (1929), also called Willamette River Springfield Bridge, is a 3-span continuous Warren through truss bridge over the Willamette River, between Springfield and Eugene. Striking features of this bridge, constructed in 1929, are the graceful arch-shaped curvature of its polygonal top chord geometry, decorative concrete railings and entrance pylon ornamental lights. The bridge was designed by Conde B McCullough, acclaimed bridge engineer and designer of many arched bridges on the Oregon Coast Highway noted for their beauty and innovation. Other notable features: it is one of only three pre-1941 continuous truss designs, and it is the largest non-cantilever truss span in the state. Lane County, Oregon, USA.
    AJH_221115_1629.jpg
  • Springfield Main Street Bridge (1929), also called Willamette River Springfield Bridge, is a 3-span continuous Warren through truss bridge over the Willamette River, between Springfield and Eugene. Striking features of this bridge, constructed in 1929, are the graceful arch-shaped curvature of its polygonal top chord geometry, decorative concrete railings and entrance pylon ornamental lights. The bridge was designed by Conde B McCullough, acclaimed bridge engineer and designer of many arched bridges on the Oregon Coast Highway noted for their beauty and innovation. Other notable features: it is one of only three pre-1941 continuous truss designs, and it is the largest non-cantilever truss span in the state. Lane County, Oregon, USA.
    AJH_221115_1631.jpg
  • Springfield Main Street Bridge (1929), also called Willamette River Springfield Bridge, is a 3-span continuous Warren through truss bridge over the Willamette River, between Springfield and Eugene. Striking features of this bridge, constructed in 1929, are the graceful arch-shaped curvature of its polygonal top chord geometry, decorative concrete railings and entrance pylon ornamental lights. The bridge was designed by Conde B McCullough, acclaimed bridge engineer and designer of many arched bridges on the Oregon Coast Highway noted for their beauty and innovation. Other notable features: it is one of only three pre-1941 continuous truss designs, and it is the largest non-cantilever truss span in the state. Lane County, Oregon, USA.
    AJH_221115_1648.jpg
  • Springfield Main Street Bridge (1929), also called Willamette River Springfield Bridge, is a 3-span continuous Warren through truss bridge over the Willamette River, between Springfield and Eugene. Striking features of this bridge, constructed in 1929, are the graceful arch-shaped curvature of its polygonal top chord geometry, decorative concrete railings and entrance pylon ornamental lights. The bridge was designed by Conde B McCullough, acclaimed bridge engineer and designer of many arched bridges on the Oregon Coast Highway noted for their beauty and innovation. Other notable features: it is one of only three pre-1941 continuous truss designs, and it is the largest non-cantilever truss span in the state. Lane County, Oregon, USA.
    AJH_221115_1638.jpg
  • Ferry Street Bridge (1950), also called Coburg Road Bridge for the road that it carries, is a two-span continuous Warren through truss steel bridge, with polygonal top chord, spanning the Willamette River. It is located near downtown Eugene, where the city’s founder Eugene Skinner once operated a ferry service. The bridge has long multi-beam concrete approach spans, accounting for the flood plain and floodway corresponding to the river hydrology. The bridge was constructed in 1950 – replacing its predecessor from 1876 – and was extensively rehabilitated in 1999 by Mowat Construction Company. Notable features are its mid-span pier (mid river), supporting a continuous truss, ornamental lighting, and separated pedestrian/bicycle walkways on both sides, supported by curved cantilever sidewalk brackets. Lane County, Oregon, USA.
    AJH_221116_1705.jpg
  • Springfield Main Street Bridge (1929), also called Willamette River Springfield Bridge, is a 3-span continuous Warren through truss bridge over the Willamette River, between Springfield and Eugene. Striking features of this bridge, constructed in 1929, are the graceful arch-shaped curvature of its polygonal top chord geometry, decorative concrete railings and entrance pylon ornamental lights. The bridge was designed by Conde B McCullough, acclaimed bridge engineer and designer of many arched bridges on the Oregon Coast Highway noted for their beauty and innovation. Other notable features: it is one of only three pre-1941 continuous truss designs, and it is the largest non-cantilever truss span in the state. Lane County, Oregon, USA.
    AJH_221115_1681.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1789.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1783.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1780.jpg
  • Springfield Main Street Bridge (1929), also called Willamette River Springfield Bridge, is a 3-span continuous Warren through truss bridge over the Willamette River, between Springfield and Eugene. Striking features of this bridge, constructed in 1929, are the graceful arch-shaped curvature of its polygonal top chord geometry, decorative concrete railings and entrance pylon ornamental lights. The bridge was designed by Conde B McCullough, acclaimed bridge engineer and designer of many arched bridges on the Oregon Coast Highway noted for their beauty and innovation. Other notable features: it is one of only three pre-1941 continuous truss designs, and it is the largest non-cantilever truss span in the state. Lane County, Oregon, USA.
    AJH_221115_1658.jpg
  • Springfield Main Street Bridge (1929), also called Willamette River Springfield Bridge, is a 3-span continuous Warren through truss bridge over the Willamette River, between Springfield and Eugene. Striking features of this bridge, constructed in 1929, are the graceful arch-shaped curvature of its polygonal top chord geometry, decorative concrete railings and entrance pylon ornamental lights. The bridge was designed by Conde B McCullough, acclaimed bridge engineer and designer of many arched bridges on the Oregon Coast Highway noted for their beauty and innovation. Other notable features: it is one of only three pre-1941 continuous truss designs, and it is the largest non-cantilever truss span in the state. Lane County, Oregon, USA.
    AJH_221115_1632.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1794.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1787.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1788.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1779.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1778.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2215.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2213.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2199.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2191.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2188.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1796.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1766.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2206.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1785.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1784.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2195.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2195-BW.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2190.jpg
  • Snow-Reed Bridge (1925) is the oldest bridge in Fort Lauderdale, and the last operational swing span bridge surviving in South Florida. In 1989, 64 years after construction, it was designated a historic landmark and renamed from the Southwest 11th Avenue Bridge to Snow-Reed Bridge, for the two mayors whose terms spanned its 1924-5 construction. The bridge spans the North Fork of the New River and was constructed on the north-south alignment of SW 11th Avenue, connecting the neighborhoods of Riverside and Sailboat Bend. The structure is a Warren Pony Swing Metal Truss – the Pony part being simply a through truss that lacks overhead cross-bracing between the top chords. Nice cantilevered sidewalks appear to have been added at some point. The bridge has no practical vertical clearance, while it obstructs a navigable river, so an on-site bridge operator is required 24/7. A one-year major renovation ending in 2010 added a new octagonal-shaped bridge tender control house while retaining and restoring the original bridge tender’s house. Notable also is this old bridge’s vulnerability to sea-level rise; its swing mechanics are set just inches above sea water tide levels, so the mechanics are repeatedly submerged in salt water. Broward County, Florida, USA.
    AJH_230123_2189.jpg
  • The Astoria-Megler Bridge (1966) spans the mouth of the Columbia River between Astoria, Oregon and Point Ellice near Megler, Washington. The bridge type is a steel cantilever through truss, designed jointly by the state highway departments of Oregon and Washington. Construction was started in 1962 and completed in 1966. Total length: 4.1 mi / 6.5km.
    AJH_110527_3410.jpg
  • The new Sauvie Island Bridge was assembled in Portland and floated down the Willamette River and Multnomah Channel, then guided into position alongside the old 1950 bridge on December 28, 2007. The original Parker truss bridge (green paint, background) built in 1950 with a 200ft (61m) main span, was replaced with this tied-arch design with a 360ft (110m) span, after cracks were discovered in 2001. The new bridge was opened in 2008. Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT). Portland Oregon USA.
    AJH_071228_1763.jpg
  • The new Sauvie Island Bridge was assembled in Portland and floated down the Willamette River and Multnomah Channel, then guided into position alongside the old 1950 bridge on December 28, 2007. The original Parker truss bridge (green paint, background) built in 1950 with a 200ft (61m) main span, was replaced with this tied-arch design with a 360ft (110m) span, after cracks were discovered in 2001. The new bridge was opened in 2008. Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT). Portland Oregon USA.
    AJH_071228_1761.jpg
  • The new Sauvie Island Bridge was assembled in Portland and floated down the Willamette River and Multnomah Channel, then guided into position alongside the old 1950 bridge on December 28, 2007. The original Parker truss bridge (green paint, background) built in 1950 with a 200ft (61m) main span, was replaced with this tied-arch design with a 360ft (110m) span, after cracks were discovered in 2001. The new bridge was opened in 2008. Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT). Portland Oregon USA.
    AJH_071228_1759.jpg
  • The Astoria-Megler Bridge (1966) spans the mouth of the Columbia River between Astoria, Oregon and Point Ellice near Megler, Washington. The bridge type is a steel cantilever through truss, designed jointly by the state highway departments of Oregon and Washington. Construction was started in 1962 and completed in 1966. Total length: 4.1 mi / 6.5km.
    AJH_121224_0136.jpg
  • The new Sauvie Island Bridge was assembled in Portland and floated down the Willamette River and Multnomah Channel, then guided into position alongside the old 1950 bridge on December 28, 2007. The original Parker truss bridge (green paint, background) built in 1950 with a 200ft (61m) main span, was replaced with this tied-arch design with a 360ft (110m) span, after cracks were discovered in 2001. The new bridge was opened in 2008. Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT). Portland Oregon USA.
    AJH_071228_1760.jpg
  • The new Sauvie Island Bridge was assembled in Portland and floated down the Willamette River and Multnomah Channel, then guided into position alongside the old 1950 bridge on December 28, 2007. The original Parker truss bridge (green paint, background) built in 1950 with a 200ft (61m) main span, was replaced with this tied-arch design with a 360ft (110m) span, after cracks were discovered in 2001. The new bridge was opened in 2008. Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT). Portland Oregon USA.
    AJH_071228_1756.jpg
  • Ship passing the Astoria-Megler Bridge (1966) spans the mouth of the Columbia River between Astoria, Oregon and Point Ellice near Megler, Washington. The bridge type is a steel cantilever through truss, designed jointly by the state highway departments of Oregon and Washington. Construction was started in 1962 and completed in 1966. Total length: 4.1 mi / 6.5km.
    AJH_081227_2567.jpg
  • The new Sauvie Island Bridge was assembled in Portland and floated down the Willamette River and Multnomah Channel, then guided into position alongside the old 1950 bridge on December 28, 2007. The original Parker truss bridge (green paint, background) built in 1950 with a 200ft (61m) main span, was replaced with this tied-arch design with a 360ft (110m) span, after cracks were discovered in 2001. The new bridge was opened in 2008. Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT). Portland Oregon USA.
    AJH_071228_1762.jpg
  • The new Sauvie Island Bridge was assembled in Portland and floated down the Willamette River and Multnomah Channel, then guided into position alongside the old 1950 bridge on December 28, 2007. The original Parker truss bridge (green paint, background) built in 1950 with a 200ft (61m) main span, was replaced with this tied-arch design with a 360ft (110m) span, after cracks were discovered in 2001. The new bridge was opened in 2008. Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT). Portland Oregon USA.
    AJH_071228_1758.jpg
  • The new Sauvie Island Bridge was assembled in Portland and floated down the Willamette River and Multnomah Channel, then guided into position alongside the old 1950 bridge on December 28, 2007. The original Parker truss bridge (green paint, background) built in 1950 with a 200ft (61m) main span, was replaced with this tied-arch design with a 360ft (110m) span, after cracks were discovered in 2001. The new bridge was opened in 2008. Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT). Portland Oregon USA.
    AJH_071228_1757.jpg
  • The Astoria-Megler Bridge (1966) spans the mouth of the Columbia River between Astoria, Oregon and Point Ellice near Megler, Washington. The bridge type is a steel cantilever through truss, designed jointly by the state highway departments of Oregon and Washington. Construction was started in 1962 and completed in 1966. Total length: 4.1 mi / 6.5km.
    AJH_121224_0137.jpg
  • The Astoria-Megler Bridge (1966) spans the mouth of the Columbia River between Astoria, Oregon and Point Ellice near Megler, Washington. The bridge type is a steel cantilever through truss, designed jointly by the state highway departments of Oregon and Washington. Construction was started in 1962 and completed in 1966. Total length: 4.1 mi / 6.5km.
    AJH_121224_0135.jpg
  • The Astoria-Megler Bridge (1966) spans the mouth of the Columbia River between Astoria, Oregon and Point Ellice near Megler, Washington. The bridge type is a steel cantilever through truss, designed jointly by the state highway departments of Oregon and Washington. Construction was started in 1962 and completed in 1966. Total length: 4.1 mi / 6.5km.
    AJH_081228_2594.jpg
  • The new Sauvie Island Bridge was assembled in Portland and floated down the Willamette River and Multnomah Channel, then guided into position alongside the old 1950 bridge on December 28, 2007. The original Parker truss bridge (green paint, background) built in 1950 with a 200ft (61m) main span, was replaced with this tied-arch design with a 360ft (110m) span, after cracks were discovered in 2001. The new bridge was opened in 2008. Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT). Portland Oregon USA.
    AJH_071228_1755.jpg
  • The new Sauvie Island Bridge, spanning the Multnomah Channel, was opened in 2008.  This tied-arch design with a 360ft (110m) span replaced the original 1950 Parker truss bridge with a 200ft (61m) main span, after cracks were discovered in 2001.  Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT).
    AJH_221012_1278.jpg
  • The new Sauvie Island Bridge, spanning the Multnomah Channel, was opened in 2008.  This tied-arch design with a 360ft (110m) span replaced the original 1950 Parker truss bridge with a 200ft (61m) main span, after cracks were discovered in 2001.  Contractor: Max J Kuney Construction Company; Owner: Oregon Department of Transportation (ODOT).
    AJH_221012_1274.jpg
Next
  • Facebook
  • Twitter
x

Andrew Haliburton

  • ...more Images / Search / Buy
    • All Galleries
    • Search
    • Cart
    • Lightbox
    • Client Area
  • Buy Calendar
  • Portfolio
  • About
  • Contact