Show Navigation

Search Results

Refine Search
Match all words
Match any word
Prints
Personal Use
Royalty-Free
Rights-Managed
(leave unchecked to
search all images)
{ 50 images found }

Loading ()...

  • Sunset silhouette of the Horns, Drakensberg, South Africa.  Crepuscular rays (God beams) diffracting at the neck between Inner Horn 3005m / 9858ft (left) and Outer Horn 3006m / 9860ft (right).  The saw-tooth profile of tiny peaks to the left is a group called The Chessmen.  Inner Horn was first climbed in 1925; Outer Horn in 1934.  The names are believed to have been derived from the Zulu name for nearby Cathedral Peak.  However, under some lighting conditions, as seen here, the gap between the Horns resembles antlers or deer horns.  One of the last free ranges of the San people or Bushmen, the Drakensberg is steeped in San folk lore.  Nikon F100, 70-300/4-5.6D, Kodak E100VS.
    Horns, Drakensberg-2004.jpg
  • Sunset silhouette of the Horns, Ukhahlamba-Drakensberg Park, KwaZulu-Natal, South Africa. Crepuscular rays (God beams) diffracting at the neck between Inner Horn 3005m / 9858ft (left) and Outer Horn 3006m / 9860ft (right).  The saw-tooth profile of tiny peaks to the left is a group called the Chessmen.  Inner Horn was first climbed in 1925; Outer Horn in 1934.  The names are believed to have been derived from the Zulu name for nearby Cathedral Peak.  However, under some lighting conditions, as seen here, the gap between the Horns resembles antlers or deer horns.  One of the last free ranges of the San people or Bushmen, the Drakensberg is steeped in San folk lore.  Nikon F100, 70-300/4-5.6D, Kodak E100VS.
    Horns Drakensberg.jpg
  • In 1903, John Charles Olmsted of the Massachusetts-based landscape design firm Olmsted Brothers recommended that a city park be developed at Mount Tabor.  Portland Parks Superintendent Emanuel T. Mische, who had worked at Olmsted Brothers, consulted with Olmsted on the park layout and integration of the reservoirs into the park design. This is one of three open reservoirs at Mt Tabor Park and of five total in Portland.  The 3 open reservoirs in Mount Tabor Park were placed in the National Register of Historic Places on January 15, 2004.  Environmental Protection Agency (EPA) regulation: Long Term 2 Enhanced Surface Water Treatment Rule, referred to as the LT2 rule imposes new requirements that open water reservoirs be covered, buried or additionally treated.  This applies to Portland's five open reservoirs and to the unfiltered Bull Run sourse supplying them. Portland, Oregon, USA.
    March 2014 Mount Tabor Park Calendar.jpg
  • In 1903, John Charles Olmsted of the Massachusetts-based landscape design firm Olmsted Brothers recommended that a city park be developed at Mount Tabor.  Portland Parks Superintendent Emanuel T. Mische, who had worked at Olmsted Brothers, consulted with Olmsted on the park layout and integration of the reservoirs into the park design. This is one of three open reservoirs at Mt Tabor Park and of five total in Portland.  The 3 open reservoirs in Mount Tabor Park were placed in the National Register of Historic Places on January 15, 2004.  Environmental Protection Agency (EPA) regulation: Long Term 2 Enhanced Surface Water Treatment Rule, referred to as the LT2 rule imposes new requirements that open water reservoirs be covered, buried or additionally treated.  This applies to Portland's five open reservoirs and to the unfiltered Bull Run sourse supplying them. Portland, Oregon, USA.
    03-March-2014.jpg
  • In 1903, John Charles Olmsted of the Massachusetts-based landscape design firm Olmsted Brothers recommended that a city park be developed at Mount Tabor.  Portland Parks Superintendent Emanuel T. Mische, who had worked at Olmsted Brothers, consulted with Olmsted on the park layout and integration of the reservoirs into the park design. This is one of three open reservoirs at Mt Tabor Park and of five total in Portland.  The 3 open reservoirs in Mount Tabor Park were placed in the National Register of Historic Places on January 15, 2004.  Environmental Protection Agency (EPA) regulation: Long Term 2 Enhanced Surface Water Treatment Rule, referred to as the LT2 rule imposes new requirements that open water reservoirs be covered, buried or additionally treated.  This applies to Portland's five open reservoirs and to the unfiltered Bull Run sourse supplying them. Portland, Oregon, USA.
    AJH-05a-May-2016-Mt-Tabor-Park-Calen...jpg
  • In 1903, John Charles Olmsted of the Massachusetts-based landscape design firm Olmsted Brothers recommended that a city park be developed at Mount Tabor.  Portland Parks Superintendent Emanuel T. Mische, who had worked at Olmsted Brothers, consulted with Olmsted on the park layout and integration of the reservoirs into the park design. This is one of three open reservoirs at Mt Tabor Park and of five total in Portland.  The 3 open reservoirs in Mount Tabor Park were placed in the National Register of Historic Places on January 15, 2004.  Environmental Protection Agency (EPA) regulation: Long Term 2 Enhanced Surface Water Treatment Rule, referred to as the LT2 rule imposes new requirements that open water reservoirs be covered, buried or additionally treated.  This applies to Portland's five open reservoirs and to the unfiltered Bull Run sourse supplying them. Portland, Oregon, USA.
    AJH_130120_0323_DRV.jpg
  • In 1903, John Charles Olmsted of the Massachusetts-based landscape design firm Olmsted Brothers recommended that a city park be developed at Mount Tabor.  Portland Parks Superintendent Emanuel T. Mische, who had worked at Olmsted Brothers, consulted with Olmsted on the park layout and integration of the reservoirs into the park design. This is one of three open reservoirs at Mt Tabor Park and of five total in Portland.  The 3 open reservoirs in Mount Tabor Park were placed in the National Register of Historic Places on January 15, 2004.  Environmental Protection Agency (EPA) regulation: Long Term 2 Enhanced Surface Water Treatment Rule, referred to as the LT2 rule imposes new requirements that open water reservoirs be covered, buried or additionally treated.  This applies to Portland's five open reservoirs and to the unfiltered Bull Run sourse supplying them. Portland, Oregon, USA.
    AJH_130120_0328.jpg
  • Labor Day camping trip to Cape Lookout State Park, Tillamook, Oregon.
    AJH_130831_1881.jpg
  • Labor Day camping trip to Cape Lookout State Park, Tillamook, Oregon.
    AJH_130831_1884.jpg
  • Outer Horn 3006m (9,860ft) silhouette and crepuscular rays, Bell 2930m and Cathedral Peak 3004m, Cathedral Peak Hotel.  Ukhahlamba-Drakensberg Park, KwaZulu-Natal, South Africa. Nikon F100, 70-300/4-5.6D. Kodak E100VS.
    Outer Horn Silhouette Drakensberg.jpg
  • Outer Horn 3006m (9,860ft) silhouette and crepuscular rays, Bell 2930m and Cathedral Peak 3004m, Cathedral Peak Hotel.  Ukhahlamba-Drakensberg Park, KwaZulu-Natal, South Africa. Nikon F100, 70-300/4-5.6D. Kodak E100VS.
    Cathedral Ridge Silhouette, Drakensb...jpg
  • Sunrise silhouette of the southwest ridge of Churup Oeste (West) 5,493m, viewed from Huaráz.
    01_AJH_080630_1993_DRV.jpg
  • Sunset over Portland and Reservoir 6 from Mount Tabor Park. To comply with drinking water regulations, the Portland Water Bureau disconnected Mount Tabor's original uncovered reservoirs from the drinking water system in 2015. Mount Tabor Park, Portland, Oregon, USA.
    Sunset Portland Reservoir 6 Mt Tabor...jpg
  • Beautiful hand-crafted greeting cards made with the finest inks and professional matte paper. All cards feature images of Mount Tabor Park, printed on Epson's Signature Worthy 100% cotton rag fine art paper. Cards are standard size 5" x 7" and include mailing envelope. Since each card is a fine art professional print, they can be mounted behind a standard matte with 5” x 7” opening and framed.
    Equinox-Sunset-Mt-Tabor-Park.jpg
  • Sunrise silhouette of the southwest ridge of Churup Oeste (West) 5,493m, viewed from Huaráz.
    Churup, Cordillera Blanca.jpg
  • Sunrise silhouette of the southwest ridge of Churup Oeste (West) 5,493m, viewed from Huaráz, Cordillera Blanca, Peru.
    Peru, Titled Silhouette
  • Sun stars radiate from the crescent-shaped sliver of sun not obscured by the moon.  This photo was taken at the height of the solar eclipse, at 0922 PTD on August 21, 2017.   This was only a partial eclipse, as viewed from Mount Tabor Park in Portland, Oregon. These radiating sun stars are caused by the aperture blades in the lense closed down to form a small iris.  Nikon D700, Nikon AF Nikkor 300mm f/4 IF-ED, Nikon TC-301.
    AJH_170821_1040.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1731.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1729.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1745.jpg
  • The Last Joist, Columbia River, Astoria, Oregon. Hundred-year-old pilings along Astoria's waterfront, that once supported a thriving fish processing and packing industry, Astoria, Oregon, USA.
    the-last-joist-columbia-river.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1739.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1725.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1718.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1735.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1757.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1760.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1762.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1746.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1728.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1723.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1715.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1709.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1753.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1755.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1740.jpg
  • Booth-Kelly Railroad Bridge (1882), now called Hayden Bridge, is a single span Whipple through truss spanning the McKenzie River in Springfield. A Whipple truss is a (stronger) variation of the Pratt truss, also called a “Double Intersection Pratt”, characterized by diagonal tension members crossing adjacent verticals, thereby spanning two panels instead of just one for the Pratt truss. It is considered the oldest surviving bridge in Oregon, while rare and significant for its wrought iron Phoenix columns. This bridge has been moved once. Originally built in 1882 by Phoenixville Bridge Works at Corrine, Utah, it was dismantled and relocated in 1901 to its current location to serve the since abandoned Weyerhaeuser Logging Railway. The bridge was abandoned in 1987, then decked for pedestrian use and reopened in 2019. Notable also is the use of longitudinal bracing rods beneath the bottom chord bracing the deck beams. Lane County, Oregon, USA.
    AJH_221116_1748.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1790.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1783.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1780.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1796.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1778.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1789.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1779.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1794.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1787.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1788.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1785.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1784.jpg
  • Armitage Bridge (1887), also called Coburg Railroad Bridge and McKenzie River Railroad Bridge (historically, John Day Railroad Bridge), is a single span Whipple through truss bridge over the McKenzie River, between Eugene and Coburg. This bridge has been moved once. Originally erected in 1887 across the John Day River at the confluence with the Columbia River, it was dismantled and relocated here in 1907 by the American Bridge Company for new owners, Southern Pacific Railroad. This bridge was designed by prominent American civil engineer and great bridge engineer, George S. Morison, who designed many major bridges, some of similar configuration to this one. The bridge is made of wrought iron, pin-connected, and riveted throughout, making it one of the few remaining bridges of its era. Further, while this bridge was a relatively small project for Morison, it remains one of the few surviving Morison bridges of this distinctive configuration. Notable features are the deep lattice portal bracing, mid-height horizontal beam in the end panels and cast-iron decorative details, like the date plate. Lane County, Oregon, USA.
    AJH_221116_1766.jpg
  • Facebook
  • Twitter
x

Andrew Haliburton

  • ...more Images / Search / Buy
    • All Galleries
    • Search
    • Cart
    • Lightbox
    • Client Area
  • Buy Calendar
  • Portfolio
  • About
  • Contact